short - Connect Multiplex channels

Electrically connect (short) or disconnect two of the PLT-300A’s four multiplexer channels to each other. This is used, for example, to route two signals that were each assigned to a mux channel with mux - Multiplex Control together, or to bridge two DUT test points through the multiplexer relay matrix. This command is PLT-300A only.

Usage:

- command: short <muxA> <muxB> set|release

Argument	Description
muxA	Multiplex channel index (`0`..``3``).
muxB	Multiplex channel index (`0`..``3``), different from muxA.
`set`	Short (electrically connect) the two specified multiplex channels.
`release`	Release (disconnect) the short between the two specified multiplex channels.

Examples

Fixture Control