pltOS v2.0

Warning

pltOS v2.x is a maintenance-only release track, and is no longer recommended for new projects.

pltOS v2.0.52

Bugs fixed:

  • PLTOS-407: canMatch command: match complete CAN-FD payload

Changes:

  • PLTOS-406: Improved UI responsiveness during PLTcloud connectivity checks.

pltOS v2.0.51

Bugs Fixed:

  • PLTOS-403: Avoid This PLT needs to be enrolled when unable to connect to PLTcloud.

Changes:

  • PLTOS-402: preface failure detail with failing command

  • PLTOS-404: measure command: include acceptance range in DMM out-of-range failures

pltOS v2.0.50

(not released publicly)

pltOS v2.0.49

(not released publicly)

pltOS v2.0.48

Bugs Fixed:

  • PLTOS-401: Fix test steps failing with exec: Wait was already called, instead of the actual failure message.

pltOS v2.0.47

Changes:

Bugs Fixed:

  • PLTOS-391: uart command: Ensure proper errors are emitted for operator abort and expected data not received.

pltOS v2.0.46

(not released publicly)

pltOS v2.0.45

New Features:

  • PLTOS-128: Connectivity screen

Changes:

  • PLTOS-396: uart command: reworked context-aware polling

pltOS v2.0.44

Bugs fixed:

  • PLTOS-234: Avoid PLTcloud reconnection on authentication failures

  • PLTOS-389: agentExec command: handle unknown handle, timeout instead of “expected data not found”

pltOS v2.0.43

(not released publicly)

pltOS v2.0.42

New Features:

  • PLTOS-234: agentExec command: execute a command on a PLT Agent host

pltOS v2.0.41

New Features:

  • PLTOS-383: support for operator messages in Chinese, Japanese and Korean

pltOS v2.0.40

(not released publicly)

pltOS v2.0.39

Changes:

  • PLTOS-234: PLTcloud API client robustness improvements

pltOS v2.0.38

Bugs Fixed:

  • PLTOS-382: uart command: expect/extract flush race condition fix

pltOS v2.0.37

New Features:

  • PLTOS-379: scan command: support SparkFun 2D Barcode Scanner

pltOS v2.0.36

(not released publicly)

pltOS v2.0.35

Changes:

  • PLTOS-374: canSend command: Allow sending messages with an empty payload.

pltOS v2.0.34

Bugs Fixed:

  • PLTOS-367: uart command: flush UART (USB-CDC) hardware buffers (except when noflush is specified), as well as upon UART (USB-CDC) I/O failures. This is distinct from the in-memory channel draining that was already being performed.

Changes:

  • PLTOS-286: JouleScope selftest: allow negative readouts

pltOS v2.0.33

Bugs Fixed:

  • PLTOS-367: Fix potential race condition when using a uart command with an expect: field.

Changes:

  • PLTOS-367: log partial extractKey: matches upon extraction key count mismatch.

pltOS v2.0.32

Bugs Fixed:

  • PLTOS-336: PLT-300A internal firmware update stability fixes

New Features:

  • PLTOS-286: eval command: support power (W) in the numeric() function.

  • PLTOS-337: Extend RDTP support to RDTP32…127

  • PLTOS-370: Test plan-specific PASS/FAIL Templates

pltOS v2.0.31

(not released publicly)

pltOS v2.0.30

Bugs Fixed:

  • PLTOS-366: Fix potential lock-up after internal firmware update failures

New Features:

  • PLTOS-369: New value command: Parse arbitrary values

  • PLTOS-369: Updated scan command: Match substring, extract multiple values

Changes:

  • PLTOS-358: Update internal selftest: VOLT.Diff: Relax range from 1550-1650mV to 1450-1750mV

pltOS v2.0.29

Bugs Fixed:

  • PLTOS-286: joulescope: fix handling of negative and partial bounds

  • PLTOS-367: uart: process partial reads on error

Changes:

  • PLTOS-286: joulescope: capture all readings in report

pltOS v2.0.28

(not released publicly)

pltOS v2.0.27

Bugs Fixed:

  • PLTOS-365: Log collection of closed UART channels

New Features:

  • PLTOS-358: Select diagnostic test plan

Changes:

  • PLTOS-361: Increase compression of reports sent to PLTcloud

pltOS v2.0.26

(not released publicly)

pltOS v2.0.25

(not released publicly)

pltOS v2.0.24

(not released publicly)

pltOS v2.0.23

Bugs Fixed:

  • PLTOS-359: Symbol scanners affecting UI controls

  • PLTOS-364: UART logging: record start instead of end of transmission

Changes:

  • PLTOS-361: Compress larger PLTcloud API requests

  • PLTOS-362: Interactive report re-submission upon failures

  • PLTOS-363: Visually indicate when PLTcloud uploads are in progress

pltOS v2.0.22

(not released publicly)

pltOS v2.0.21

(retracted)

pltOS v2.0.20

Bugs Fixed:

  • PLTOS-354: Improved resilience of internal button handling

pltOS v2.0.19

Bugs Fixed:

  • PLTOS-345: PLTcloud client stability fixes, fixing some cases where PLT would need to be re-enrolled after an update

pltOS v2.0.18

Bugs Fixed:

  • PLTOS-243: Soft power-off handling stability improvements

New Features:

  • PLTOS-350: New agentCfg command: setup SBC session

pltOS v2.0.17

Bugs Fixed:

  • PLTOS-346: canCfg path: handling and CAN-FD dongle detection bug fixes.

Changes:

  • PLTOS-346: canSend nofd option to send Classic CAN frames on a port configured for CAN-FD

pltOS v2.0.16

Bugs Fixed:

  • PLTOS-338: Parse timeout: without units as milliseconds

  • PLTOS-347: Fix usb invalid subcommand error

New Features:

pltOS v2.0.15

Bugs Fixed:

  • PLTOS-343: PLT-300A shows initial “Loading..” screen for up to 30 seconds.

  • PLTOS-344: Button handling stability fixes

pltOS v2.0.13

New Features:

  • PLTOS-335: secondary display: show release info, previous test plan results

pltOS v2.0.8

Initial v2.0.x release.

New Features:

  • PLTOS-19: HW-accelerated UI rendering

  • PLTOS-24: Show rolling test results on external HDMI display

Warning

As the UI rendering changes in pltOS v2.0 result in faster overall test execution, existing test plans tested with earlier pltOS versions may need to be adjusted.