DUT Power (PWR8)
The PWR8 connector is used to supply power to the DUT.

PWR8 connector, on the rear of the PLT-300A
It should be connected to the PWR8 port of a Pogo-Pin Cassette or PLT Breakout Board, or can be connected directly with the DUT or test fixture.
Pinout
8-pin Molex Micro-FIT (0430450800) connector on rear of the PLT-300A.
Pin |
Signal |
Description |
---|---|---|
1 |
|
DUT Power (1.8V) |
2 |
|
DUT Power (3.3V) |
3 |
|
DUT Power (5V) |
4 |
|
DUT Power (variable) |
5 |
|
DUT Ground #1 |
6 |
|
DUT Ground #2 |
7 |
|
DUT Ground #3 |
8 |
|
DUT Ground #4 |
See also